Connection Form: Welding
Nominal Pressure: ANSI CLASS 150-900
Structure: Floating Ball Valve
Application: Industrial Usage
Material: Carbon Steel
Driving Mode: Manual
Channel: Straight Through Type
Type: Floating Ball Valve
Temperature: Normal Temperature
HS Code: 8481804090
City Gas: Gas outlet pipe, supply pipe for main line and all brach lines etc.
District heat supply: Outlet pipe, main line and brach line for large heat supply equipment.
Heat exchanger: On-off of pipe and all loops.
Steel plant: Various fluid pipes, discharging pipe for exaust gas, supply pipe for gas, thermal power and fuel.
Various industrial equipment: Various heat treatment pipes, pipe for all kinds of industrial gas and thermal power.
Outer leakage won't occur for welded ball valve.
Valve seat consists of teflon sealing ring strengthened by carbon fiber and belleville spring, so it can adjust well to change on pressure and temperature without any leakage risk within marked pressure and temperature range.
The whole process of sphere is tracked and detected with advanced computer and detector, so the process precision is very high, operation is very simple and easy, no bad interference.
Body material is same as material of pipe, when vehicles pass through the groud or even earthquake happens, the stress is evenly distributed without any deformation risk.
Sealing ring is made of PTFE containling 20% carbon, Ensure no leakage will happen.
Buried ground fully welded ball valve can be installed in small and shallow well being set on ground rather than large valve well, so the construction cost and project time can be saved a lot.
The length of valve body and height of stem can be designed in accordance with the requirement of project.
The service life can be more than 15 years when used at normal operational and using conditions.
Main Parts and Materials.
|No.||Part Name||Part Material|
|1-1.||Welding end||Steel St 37.0|
|1-2.||Female end||Steel St 52/St 37.0|
|1-3.||Flange||Steel R St 37-2|
|2.||Belleville spring||65 Mn|
|3.||Body||Steel St 37.0|
|5.||Seat||PTFE, 20% C|
|7.||Friction packing||PTFE, 20% C|
|13.||Back-up ring||PTFE, 20% C|
|14.||Stem guide||Steel St 52|
Main External Dimensions.